TAMKO recommends the following construction techniques, procedures, specifications and materials for detailing commercial waterproofing applications.

CSI - FORMATTED GUIDE SPECIFICATIONS

The following guide specifications are in Adobe Acrobat PDF format

TAMKO TW-60 Sheet Waterproofing Membrane Specification. (14KB)

TAMKO TW-HOT MELT Hot Applied Liquid Membrane Waterproofing Specification. (38KB)

TAMKO TW-HOT MELT Hot Applied Liquid Membrane Waterproofing w/Reinforcement Specification. (25KB)

CONSTRUCTION DETAILS

The following construction detail files are in Adobe Acrobat PDF format.
TW-1 Expansion Joint or Split Slab (31KB)
TW-2 Exterior Cavity Walls & Below Grade Structures (42KB)
TW-3 Foundation Wall (43KB)
TW-4 Penetration (36KB)
TW-5 Pipe Penetration Flashing (29KB)
TW-6 Reglet Membrane Termination (26KB)
TW-7 Waterproofing Membrane Termination (26KB)
TW-8 Tunnel / Earth Detail (36KB)
TW-9 Vertical Wall Detail (27KB)
TW-10 Typical Balcony / Entry / Breezway Outside Edge Detail (15KB)
TW-11 Typical ICF Brick Ledge Detail (16KB)
TW-12 Through Wall Flashing Detail
TW-13 Through Wall Flashing Detail
TW Hot Melt Detail Brochure (665KB)

PRODUCT DATA SHEETS

The following Product Data Sheet files are in Adobe Acrobat PDF format.
TW-60 Sheet Waterproofing Membrane (33KB)
TW Moisture Wrap Moisture/Air Barrier Membrane (151KB)
TWH-1 Protection Course (124KB)
TW Metal and Tile Underlayment (110KB)
TWP-1 Quick Dry Primer (111KB)
TWP-2 Water Based Primer (97KB)
TWM-1 Mastic (122KB)
TW Underlayment (140KB)
TW FLASH-N-WRAP® 40 Reflective Sheet Membrane (45KB)
TW FLASH-N-WRAP® 25 Reflective Sheet Membrane (46KB)
TW-HOT MELT Hot Applied Liquid Membrane Waterproofing (129KB)
TW-HOT MELT Hot Applied Liquid Membrane Waterproofing with Reinforcement (130KB)
TW-HOT MELT Flashing Membrane
TW-HOT MELT Primer
TW-THRU-WALL Flashing Membrane (119KB)
Bridgeguard (56KB)